TL-WA701ND 150Mbps Wireless N Access Point User Guide
) Note:
If the LAN port of TL-WA701ND is not connected to a switch but directly to a PC,
1. The PC can directly log on to the Web management page of TL-WA701ND and manage the
access point.
2. Only the wireless STA with its VLAN ID set to 1 can communicate with the wired PC.
3) Client: This mode allows the device to act as a wireless station to enable wired host(s) to
access an AP.
Figure 4-12 Wireless Settings in Client mode
¾ Wireless Name of Root AP - If you select the radio button before Wireless Name of Root
AP, the AP client will connect to the AP according to SSID. Enter the SSID of AP that you
want to access.
¾ MAC Address of Root AP - If you select the radio button before MAC Address of Root AP,
the AP client will connect to the AP according MAC address. Enter the MAC address of AP
that you want to access.
¾ Channel Width - Determines the channel width to be used. It is unnecessary to change the
default value unless required.
¾ Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations
to access the device.
Click the Survey button to detect the SSIDs in the local area.
) Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
4) Repeater (Range Extender): In this mode, the product can extend the coverage of another
wireless Access Point or Router. The universal repeater mode is for the wireless Access
Point or Router which does not support WDS function.
34