TL-WA850RE
300Mbps Universal WiFi Range Extender User Guide
14
Figure 4-6 LAN – Smart IP (DHCP)
Figure 4-7 LAN – Static IP
MAC Address - The physical address of the LAN port, as seen from the LAN. The value
cannot be changed.
Type - Several IP types are supported, including: (1) Static IP; (2) Smart IP (DHCP), and they
are explained below.
Static IP - In this type, you can configure IP Address/Gateway manually.
Smart IP (DHCP) - In this type, if your Range Extender have connected to a router, your
client will dynamically get an IP Address/Gateway from the router, otherwise the client
will get a IP Address/Gateway in the same network as you set below. And this type is
recommended.
IP Address - Enter the IP address of your Range Extender in dotted-decimal notation (factory
default setting is 192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Gateway - The gateway should be in the same subnet as your IP address.
Note:
1. The IP parameters cannot be configured if you have chosen Smart IP (DHCP). In this
situation the device will automatically configure the IP parameters appropriate to your need.
2. If you are not familiar with the setting items in this page, it's strongly recommended to keep
the provided default values, otherwise may result in lower wireless network performance or
even can't work.