TP-Link TL-WN727N manual Hardware Installation, Software Installation,  Note

TL-WN727N

150Mbps Wireless N USB Adapter

Chapter 2 Installation

2.1Hardware Installation

There are two ways to install the Adapter:

1.Plug the Adapter directly to the USB port on your computer.

2.Connect the Adapter and your computer through the USB cable attached in package.

Note:

The prompted Found New Hardware Wizard screen will pop up when the adapter is installed correctly. Click Cancel.

2.2Software Installation

The adapter’s Setup Wizard will guide you through the installation procedures for Windows XP, Windows Vista, Windows 7, and Windows 8. The procedures in different systems are quite similar, therefore here takes the procedures in Windows 7 for example.

1.Insert the Resource CD into your CD-ROM drive, and the window below will appear. Select model TL-WN727N. There will be a menu including: Install Driver&Utility and User Guide. Click Install Driver&Utility to begin.

Figure 2-1

4