TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router
- 103 -
Loss of power during the upgrade could damage the Router.
5) The firmware version must correspond to the hardware.
6) The upgrade process takes a few moments and the Router restarts automatically when the
upgrade is complete.
4.17.4 Factory Defaults Choose menu “System Tools → Factory Defaults”, and then and you can restore the
configurations of the Router to factory defaults on the following screen
Figure 4-98 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
• The default Password: admin
• The default Subnet Mask: 255.255.255.0
) Note:
All changed settings will be lost when defaults are restored.
4.17.5 Backup & Restore Choose menu “System Tools → Backup & Restore”, and then you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 4-99.
Figure 4-99 Backup & Restore Configuration
¾ Click the Backup button to save all configuration settings as a backup file in your local
computer.
¾ To upgrade the Router's configuration, follow these instructions.