TL-WR543G 54M Wireless AP Client Router User Guide
- 32 -
) Note:
If Bridges is enabled in AP Client mode, there is only one Security Type (WEP) for you to encrypt
the wireless network. Otherwise, there are three Security Type (WEP, WPA-PSK/WPA2-PSK
and WPA/WPA2).
Be sure to click the Save button to save your settings on this page.
) Note:
The router will reboot automatically after you click Save.
5.6.2 Advanced Settings This page shows some advanced settings about this router for you.
Figure 5-18
¾ XR - The short of eXtended Range™. If enabled, the wireless transmission distance will be
longer in the same condition of circumstance.
¾ Power - The transmit power of the access point. There are five options for you to select in
the pull-down list: Max, 1/2, 1/4, 1/8 and Min.
) Note:
The router will reboot automatically after you click the Save button.
5.6.3 Site Survey This Page shows the site list of scanning result, and you can choose one to connect to.
Figure 5-19 AP List
¾ BSSID -The BSSID of the AP, usually also the MAC address of the AP.
¾ SSID -The SSID of the AP.
¾ Signal -The signal received from the AP.
¾ Channel -The channel the AP works in.
¾ Security -The AP communicates in privacy.