TP-Link TL-WR641G TL-WR641G, 2.3 Panel Layout, TL-WR641G 108M Wireless Router User Guide

TL-WR641G108M Wireless Router User Guide

Built-in NAT and DHCP server supporting static IP address distributing Supports Virtual Server, Port Triggering, and DMZ host

Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering

Supports TCP/IP, PPPoE, DHCP, ICMP, NAT

Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through Supports Traffic Stat.

Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter Ignores Ping packets from WAN or LAN ports

Supports firmware upgrade

Supports Remote and Web management

2.3 Panel Layout

2.3.1 The Front Panel

The front panel of the TL-WR641G consists of several LED indicators, which is designed to indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the front panel of the router.

Figure 2-1 Front Panel sketch

Name	Action	Description
Power	Not lit	No Power
	Lit up	Power on
	Lit up	The router is initialising
System	Flashing	The router is working properly
	Not lit	The router has a hardware error
	Not lit	There is no device linked to the corresponding port
Link/Act	Lit up	There is a device linked to the corresponding port but
		no activity
	Flashing	There is an active device linked to the corresponding
		port
WLAN	Not lit	The Wireless Radio function is disabled
	Flashing	The Wireless Radio function is enabled

Table 2-1 The LEDs description

2.3.2 The Rear Panel

The rear panel contains the following features. (Viewed from left to right:)

Wireless antenna

Factory Default Reset button

- 4 -