TL-WR642G
108M Wireless Router User Guide
Figure 4-59 System Log
The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refresh button to refresh the logs.
Click the Clear All button to clear all the logs.
4.13.8 Remote Management
You can configure the Remote Management function on this page shown in Figure
Figure 4-60 Remote Management
¾Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router’s default remote management Web port number is 80. For greater security, you can change the remote management Web interface to a custom port by entering that number in this box provided. Choose a number between 1024 and 65534, but do not use the number of any common service port.
¾Remote Management IP Address - This is the current address you will use when accessing your router from the Internet. The default IP Address is 0.0.0.0. It means this function is disabled. To enable this function, change the default IP Address to another IP Address as desired.
To access the router, you will type your router's WAN IP Address into your browser's Address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter in
64
