TP-Link TL-WR720N appendix Hardware Connection, Conguration for Windows with Setup Wizard

Package Contents

Quick Installation Guide

150Mbps Wireless N Router

TL-WR720N Power Adapter

Ethernet Cable Resource CD

150Mbps Wireless N Router

TL-WR740N/TL-WR741ND

QIG

MODEL NO. TL-WR720N

1 Hardware Connection

Wall Socket Wall Socket

Internet

Cable/DSL Modem

WPS/	POWER	WAN	1	2
RESET

4		5	Computer
	2		3

1Power o￿ your modem.

2Connect the WAN port on your Router to the modem’s LAN port with an Ethernet cable.

3Connect your computer to one of the LAN ports labeled 1~2 on the Router with an Ethernet cable.

4Power on the modem and wait for one minute .

5Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket.

2 Con￿guration for Windows with Setup Wizard

If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.

1Insert the TP-LINK Resource CD into the CD-ROM drive.

3Select your language from the drop-down menu. Click START and the Easy Setup Assistant will guide you step by step to set up the Router.

5After the connectivity is checked successfully, please click NEXT.

7You can rename your wireless network on this page. The default wireless name is TP-LINK_XXXXXX. Click NEXT to continue.

2	SelectTL-WR720Nand click Easy Setup Assistant.	4	After con￿rming the hardware connection and the status
			of LEDs, please click NEXT to continue.

6Select the WAN connection type your ISP provides and click NEXT. Here we take Dynamic IP for example.

8You are recommended to select Most Security (WPA2-PSK)to secure your wireless network.

The Router is pre-encrypted. The default wireless password, the same as the PIN code, is printed on the label at the bottom of the Router.

(To be continued)

7106503893