TL-WR720N 150Mbps Wireless N Router
Then you will go back to the Schedule Settings page and see the following list.
A static route is a pre-determined path that network information must travel to reach a specific
host or network. To add or delete a route, work in the area under the Static Routing page.
Figure 4-67 Static Routing List
To add static routing entries:
1. Click the Add New button.
2. Enter the following data:
¾ Destination IP Address - The Destination IP Address is the address of the network or host
that you want to assign to a static route.
¾ Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network
portion, and which portion is the host portion.
¾ Gateway - This is the IP Address of the gateway device that allows for contact between the
router and the network or host.
3. Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save it.
Figure 4-68 Add or Modify a Static Route Entry
To modify or delete an existing entry:
-72-