TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
• Radius Server IP - Enter the IP address of the Radius Server.
• Radius Port - Enter the port that radius service used.
• Radius Password - Enter the password for the Radius Server.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
¾ WPA/WPA2-Personal(Recommended) - It’s the WPA/WPA2 authentication type based on
pre-shared passphrase.
• Versio n - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
) Note:
If you check the WPA/WPA2-Personal(Recommended) radio button and choose TKIP
encryption, you will find a notice in red as shown in Figure 4-19.
Figure 4-19
• Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
• Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
4.6.3 Wireless MAC Filtering Choose menu “Wireless→Wireless MAC Filtering”, and then you can control the wireless
access by configuring the Wireless MAC Address Filtering function, shown in Figure 4-20.
41