COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from
Package Contents
The following contents should be found in your box:
One Internal Modem
One User's Guide
One RJ11 Cable
One Driver CD
Note: If any of the above contents is damaged or missing, please contact the retailer from whom you purchased the
1. Introduction
Thank you for choosing the
This manual provides the operating instruction for user installation procedures. If you encounter any problem during the installation or using your modem that cannot be solved with the help of this manual, please do not hesitate to contact your dealer for technical support.
2. Feature
Data Modem Communication Protocol:
Bell 212A,103
Fax Protocol:
TIA/EIA 578 class 1 FAX, Fax Speed High to 14400bps
Voice (only for
Voice/Audio Mode
Speaker/MIC jack
Data Correct: V.42 LAPM and
Data Compression: V.44/V.42 bis and MNP5
Command System: EIA/TIA 578 Class 1 Concurrently Hays AT Command
Operating System Support: Windows 98, Windows ME, Windows2000, Windows XP, and Windows 7
Flow Control: XON/XOFF or RTS/CTS
Protect Circuit: Internal arrester circuit
V.92 and V.44 New Features:
Modem On Hold
Quick Connect
PCM UP Stream
V.44 Data Compression
Note: V.92 and V.44 function need network support.
3.Hardware Installation
The basic steps for hardware installation is as follows:
1)Turn off your computer. Then open the case of your Computer.
2)Put off the metal cover on the PCI bus slot which you would like to install the modem.
1 | 2 | 3 |