TL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide
26
4.4.3 MAC Clone
You can configure the MAC address of the WAN port on this page, Figure 4-10:
Figure 4-10 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter, which is connected to your
cable/DSL Modem or Ethernet during installation. Changes are rarely needed here.
¾ WAN MAC Address - This field displays the current MAC address of the WAN port, which is
used for the WAN port. If your ISP requires that you register the MAC address, please enter
the correct MAC address into this field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the Clone MAC Address button
and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to save your settings.
) Note:
Only the PC on your LAN can use the MAC Address Clone feature.
If you click the Save button, the router will prompt you to reboot.
4.5 Wireless Figure 4-11 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 4-11): Wireless Settings,
Security Settings, MAC Filtering, Wireless Advamced and Wireless Statistics. Click any of