TL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide
27
them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided below.
4.5.1 Wireless Settings The basic settings for the wireless network are set on this page, Figure 4-12:
Figure 4-12 Wireless Settings
¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all
wireless devices in your network. The default SSID is TP-LINK_XXXXXX, but it is
recommended strongly that you change your networks name (SSID) to a different value.
This value is case-sensitive. For example, TEST is NOT the same as test.
¾ Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
The default region is United States. When you select your local region from the pull-down list,
Click the Save button, then the Note Dialog appears. Click OK.
Figure 4-13 Note Dialog
) Note:
Limited by local law regulations, version for North America does not have region selection option.
¾ Channel - This field determines which operating frequency will be used. The default channel
is set to Auto. It is not necessary to change the wireless channel unless you notice
interference problems with another nearby access point.