The Problem Solver

Before you call for service, check the following:

Problem

Possible cause

Remedy

Insufficient heating

a. dirty filters

a. clean or replace

or cooling

b. air not circulating

b. check supply registers and

 

freely

return grills for blockage

 

c. blocked outdoor coil

c. clear away leaves or other

 

 

debris

 

 

 

Failure to operate

a. power off

a. make sure main switch is

 

 

in ON position

 

b. open circuit breaker

b. reset circuit breaker, or

 

or burned-out fuses

replace burned-out fuses

 

c. improperly adjusted

c. check setting, adjust

 

thermostat

thermostat

 

 

 

No Heating or

Blower door removed

Close door securely to

Cooling – Blower

or ajar

restore power to blower

does not operate

 

 

 

 

 

Unusual Noise

 

Call your local servicer

 

 

 

Reduce the burden of unexpected repair bills with a Trane Extended Warranty.

Trane offers the finest quality products and manufacturer’s warranties on the market. But, like all good things, the Trane- provided limited warranty on your new comfort equipment will come to an end. To keep you protected, Trane offers the Extended Warranty Program. It picks up right where your Trane limited warranty leaves off. And, it offers years and years of reliable protection at a low cost. Ask your dealer for program details.

The Trane Extended Warranty provides:

1.The opportunity to supplement your Limited Warranty for five or ten years.

2.Coverage that may include parts only or parts and labor for the duration of the agreement. Be certain you read the Extended Warranty for complete details and exclusions.

3.Service work performed by servicers knowledgeable of the operation of Trane equipment.

Extra Energy Tips

Insulation

1.Make sure your home is properly insulated. This is the single most important step in conserving energy. Thermal insulation should be specified in terms of thermal resistance (R-values). R-30 (10") is recommended for ceilings, R-11 (3-1/2) for exterior walls and floors over unheated areas. In colder climates, consider additional insulation.

2.Infiltration of humid outside air is your heating and cooling system’s worst enemy — it could account for 15 to 30% of air conditioning energy requirements. Find the places where air can sneak into the home and plug them with caulking, weather- stripping or plastic. Also, weather- strip and caulk around all entrance doors and windows.

3.Cut heat transfer through your windows by 40 to 50% with double glazing (two panes of glass separ- ated by a sealed air space) and low-e glass.

4.Use wood- or metal-frame storm windows even if single-glazed windows are high quality. The extra layer of glass and the layer

of still air will cut heat transfer considerably.

5.Install storm doors at all entrances to your house.

6.Keep all windows and doors closed.

7.Remember that by increasing the glass area, you increase the amount of heat added in summer and lost in winter.

8.Make sure fireplaces have tight- fitting dampers which can be closed when the fireplace is not in use.

9.Invest in a humidifier to conserve energy in winter. The air in your home won’t be as dry, so you stay comfortable at a lower temperature setting.

Heating

10.Locate the thermostat on an inside wall away from windows and doors.

11.Set the thermostat as low as comfort permits. Each degree over 68°F can add 3% to the amount of energy needed for heating.

12.People generate heat. So lower the thermostat a degree or two when expecting a large group of guests.

Cooling

13.Set the thermostat as high as comfort will permit.

14.Make sure attics are adequately ventilated to relieve heat buildup. If necessary, improve air flow by adding or enlarging vents.

15.When building a new house or renovating an old one, choose light-colored roof shingles to reflect more of the sun’s heat.

16.During moderate weather, don’t use the air conditioner unnecessarily.

17.Draw blinds or drapes to block the sunlight during the hottest part of the day.

18.Install awnings over windows exposed to direct sunlight.

19.In the cooling season, don’t run kitchen and bath exhaust fans longer than necessary.

20.Don’t place lamps, TV sets or other heat producing devices beneath a wall-mounted thermostat. Rising heat from the equipment may cause the air conditioner system to over cool your house.

22-5157-01-0901 (EN)

5

Page 5
Image 5
Trane Central Air Conditioning manual Problem Solver, Extra Energy Tips, Insulation, Heating, Cooling

Central Air Conditioning specifications

Trane Central Air Conditioning systems are renowned for their reliability, efficiency, and advanced technology, making them a top choice for homeowners looking to maintain a comfortable indoor environment. With a history spanning over a century, Trane has built a reputation for delivering high-quality HVAC solutions that are both innovative and effective.

One of the main features of Trane central air conditioning systems is their impressive Seasonal Energy Efficiency Ratio (SEER) ratings. Many models boast SEER ratings of 14 or higher, indicating superior energy efficiency. This not only translates to lower energy bills but also showcases the company’s commitment to environmental responsibility. High-efficiency models often utilize variable-speed compressors that adjust power usage according to current cooling needs, ensuring optimal performance.

Trane's commitment to durability is evident in its use of high-quality materials and advanced engineering. The systems are designed to withstand harsh weather conditions and have been subjected to rigorous testing to ensure longevity. For instance, the use of powder-coated galvanized steel cabinets helps protect the units from moisture, rust, and corrosion, while the heavy-duty construction reduces vibration and noise nuisance.

Innovative technologies such as the Climatuff® compressor are a hallmark of Trane units. This specially designed compressor operates quietly and efficiently, maintaining consistent cooling levels while significantly reducing energy consumption. Furthermore, Trane systems are equipped with a patented XC system, enabling homeowners to control their home’s climate remotely. This integration with smart technology allows for precise temperature adjustments and monitoring, enhancing convenience.

In addition to their technical prowess, Trane air conditioners also focus on indoor air quality. Many units can be integrated with advanced purification systems that filter out allergens, dust, and pollutants, ensuring a healthier living environment. The inclusion of multi-stage filtration systems significantly improves air quality, making it ideal for allergy sufferers.

Moreover, Trane offers a range of options from basic models to high-end units, catering to varying budgets and cooling requirements. The extensive product lineup ensures that homeowners can find a system that meets their specific needs, while Trane’s comprehensive warranty options provide peace of mind regarding long-term maintenance and potential repairs.

In summary, Trane Central Air Conditioning systems are characterized by their exceptional energy efficiency, robust construction, advanced technology, and focus on air quality. Whether upgrading an existing unit or installing a new system, Trane remains a leading choice for those seeking reliable indoor climate control solutions.