®
Chapter 3 Programming PID loops
26 CNT-APG002-EN
Programming in TGP
Figure17 shows the PID block used to program PID loops in TGP editor.
The PID block is more flexible than the DDC function in PCL. The enable/
disable and failure inputs can accept any binary value, regardless of
source. The setpoint, measured variable, p-gain, i-gain, and d-gain inputs
can accept any analog value, except analog outputs, including variable
(local or from a BAS), hardware input, and network input. You can pro-
gram PID settings in the PID Properties dialog box, shown in Figure18.
Figure 17: TGP PID block
Figure 18: PID Properties dialog box
Binary value
Output: analog value
Analog value