Thermostat

Model TZEMT400BB32MAA

Installation, System Setup, and

Enrollment Instructions

To use the remote features of this thermostat, a Schlage LiNKTM account is required. Schlage LiNK™ online setup requires broadband internet service and router with available port.

For professional installation service, instructions, operation guide, and installation video modules, please visit link.schlage.com

Customer Service: (877) 288-7707

Customer Service hours of operation:

Monday-Friday 9.00am-7:00pm EST

Saturday 11:00am-6:00pm EST

Sunday 11:00am-4:00pm EST

The Trane Thermostat is compatible with single and multistage forced air systems, including:

Gas furnace systems

Oil furnace systems

Electric furnace systems

Heat pump systems

Air conditioning systems

The Trane Thermostat may be compatible with some other system types, including:

Boiler systems

Geothermal systems

Multi-zoned systems

Bridge requires one 9-Volt battery for enrollment process. Battery not included.

Call (877) 288-7707 to verify compatibility.

The Trane Thermostat is not compatible with the following system types:

Radiant floor systems

Wall heating systems

Also, the Trane Thermostat is not compatible with dual fuel systems (gas furnace & heat pump combined) without adding a special kit. See Note below.

Note about dual fuel systems: This thermostat is not compatible with dual fuel systems (heating system with both heat pump and gas furnace), unless the system is controlled with a dual fuel accessory relay kit. If you are unsure whether your dual fuel system is controlled with this accessory or if you need a dual fuel kit, please contact a qualified heating and cooling contractor.

Tools Needed

#2

1/8”

Physical Installation and Wiring

1WARNING

Voltage hazard. Can cause electrical shock or equipment damage. Disconnect power to heating and cooling equipment before beginning installation.

2 Remove the existing thermostat cover from the wall plate. Leave wires attached.

Consult instructions that came with existing thermostat as needed.

The look of your existing

 

thermostat may vary

Thermostat cover Wall plate