Transition Networks E-TBT-HB-0802 manual LANMaster T8 Port Ethernet Hub w/SIC Slot

Compliance Information

UL Listed

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own cost.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the Radio Interference Regulations of the Canadian Department of Communications.

Copyright Restrictions

© 1995 TRANSITION Networks Inc.

All rights reserved. No part of this work may be reproduced or used in any form or by any means – graphic, electronic, or mechanical – without written permission from TRANSITION Networks Inc.

Trademark Notice

All registered trademarks and trademarks are the property of their respective owners.

TN’s total liability in connection with the products and installation thereof to all persons and from all causes in the aggregate whether in contract, tort, or strict liability shall not exceed the amount paid to TN for the product directly related to the alleged damage. However, in no event shall TN have any liability to a customer or any third party with respect to a product manufactured in accordance with customer’s specifications.

C. Return Procedure

Before TN item(s) can be returned, a Credit Return Authorization (CRA), Return Material Authorization (RMA), or Material Repair Authorization (MRA)number must be obtained from TRANSITION Networks (TN) or the distributor of origin.

Locate the serial number(s) of the item(s) to be returned. From the item serial number, TN or the distributor will verify the return status and provide the appropriate number to the End User. The three types of return numbers are listed below:

•A Credit Return Authorization (CRA) number can only be requested from your distributor. This CRA number will only be issued to distributors for item(s) within 90 days from the original ship date. Under no circumstances will a CRA number be issued directly to the End User. The return item(s) must be shipped freight prepaid, by the End User or the Distributor to TN.

•A Return Material Authorization (RMA) number can be requested from TN or your distributor. This RMA number is only issued for item(s) after 90 days from the original ship date but prior to the expiration of the warranty period. The return item(s) must be shipped freight prepaid, by the End User or Distributor, to the TN address below:

TRANSITION Networks Inc.

6475 City West Parkway

Eden Prairie, MN 55344 USA

TRANSITION Networks will repair or replace the unit, at its discretion, and cover the cost of the return freight to the distributor or End User who was issued the RMA number.

•A Material Repair Authorization (MRA) number can be requested from TN or your distributor. This MRA number is only issued for out-of-warranty item(s). The return item(s) must be shipped freight prepaid, by the End User, to the TN address above. The sender will be contacted by TN after the item(s) have been received, inspected, and a cost estimate of the repair has been determined. The repair charges may be billed, with approval, through your distributor or prepaid/C.O.D. basis through the End User. In either case, charges will include freight, both ways, and repair charges.

The return authorization number is only valid for 60 days from the date of issuance. Please list this number on the outside of the carton and/or packing list. Include a copy of the original invoice or packing slip to expedite processing.

D. Restocking Fee

All returns for credit must be received in the same condition as originally shipped. If TN determines that a returned product is damaged due to improper packaging or if the item is functional and returned because of customer error, inability to use, etc., TN reserves the right to charge a minimum 15% ($10.00 minimum per item) restocking fee, the payment of which is a condition precedent to the repair and/or return of the product.

LANMaster T8 8-Port Ethernet Hub w/SIC Slot 20