Installation
This section shows the installation procedures of the switch.
Set the Switch on a sufficiently large flat space with a power outlet nearby. The surface where you put your Switch should be clean, smooth, level, and sturdy. Make sure there is enough clearance around the Switch to allow attachment of cables, power cord and air circulation.
Attaching Rubber Feet
A.Make sure mounting surface on the bottom of the Switch is grease and dust free.
B.Remove adhesive backing from your Rubber Feet.
C.Apply the Rubber Feet to each corner on the bottom of the Switch. These footpads can prevent the Switch from shock/vibration.
Mounting on the Wall
The switch can be mounted on the wall. The switch has two wallmount brackets included in the package.
Using the cross hook hole at the bottom
6
of the switch to mount the switch on the wall
