Traulsen G31010 Specifications, Equipped with one NEMA 5-20PPlug, Project, Quantity, Item #

Project		Quantity		Item #
Model Specified:				CSI Section 11400
		Specifications
Construction, Hardware and Insulation			Refrigeration System
Cabinet exterior front, louver assembly and doors are constructed of 20 gauge			A top mounted, self-contained, balanced refrigeration system using R-404A
stainless steel. Cabinet sides (including returns), interior and door liners are			refrigerant is conveniently located behind the one piece louver assembly. It features
constructed of anodized aluminum. The exterior cabinet top, back and bottom are			an easy to clean front facing condenser, thermostatic expansion valve, air-cooled,
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are			semi-hermetic compressor, large, high humidity evaporator coil located outside the
included.			food zone and a top mounted non-electric condensate evaporator. A 9' cord and
Doors are equipped with a gasket protecting metal door pan, removable plug			plug is provided. Standard operating temperature is 0 to -5°F.
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide			Controller
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to			The easy to use water resistant microprocessor control system is supplied standard.
automatically activate the interior incandescent lighting. Guaranteed for life, work			It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
flow door handles are mounted horizontally over recess in door which limits			Display Capability.
protrusion from door face into aisleways.			Interior
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.			Standard interior arrangements include three (3) epoxy coated wire shelves per
Anti condensate heaters are located behind each door opening.			section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
Both the cabinet and door(s) are insulated with an average of 2" thick high density,			do not have any large gaps between them requiring the use of "bridge" or "junior
non-CFC, foamed in place polyurethane.			shelves."	Recommended load limit per shelf should not exceed 225 lbs.
			Warranties
DIMENSIONAL DATA	G31010, G31011, etc.		Both a one year parts and labor warranty and a five year compressor warranty (self-
			contained models only) are provided standard. An optional 2nd year extended parts
Net Capacity cu. ft.	69.1 (1958 cu l)
			and labor warranty is also available.
Length Overall in.	765⁄16 (193.8 cm)
Depth - Over Body in.	32 (81.3 cm)
Depth - W/Door Open 90° in.	567⁄8 (144.5 cm)
Depth - Overall in.	35 (88.8 cm)
Clear Door Width in.	211⁄8 (53.6 cm)
Clear Half Door Height in.	271⁄2 (69.9 cm)
Clear Full Door Height in.	575⁄8 (146.3 cm)
Number of shelves	9
Shelf area sq. ft.1	51.9 (4.82 sq m)
Height - Overall in.	831⁄4 (211.5 cm)
ELECTRICAL DATA
Voltage	115/60/1
Feed Wires with Ground	3
Full Load Amperes	15.8
REFRIGERATION DATA
Refrigerant	R-404A	Elevation View		Plan View
BTU/HR - HP2	5220 (3⁄4 HP)
CARTON DIMENSIONS Domestic Crated Only
Length - Crated in.	91 (231 cm)
Depth - Crated in.	43 (109.2 cm)
Height - Crated in.	831⁄2 (212.1 cm)
Volume - Crated cu. ft.	189 (5354 cu l)
WEIGHT DATA
Net Weight - Uncrated lbs.	690 (313 kg)
Gross Weight - Crated lbs.	870 (395 kg)
NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on the cabinet bottom.

2= Based on a 90 degree F ambient and -10 degree F evaporator. For remote data please refer to spec sheet 13-2.

Equipped with one NEMA 5-20P Plug

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.

Continued product development may necessitate specification changes without notice. Part No. TR35849 (revised 6/08)

Section View - All Models

NOTE: Freight charges are FOB destination for dock to dock delivery within the continental USA. Liftgate delivery charges are additional. For inside delivery charges, please consult factory.

SECTION	TRAULSEN
	4401 BLUE MOUND RD.	FT. WORTH, TX 76106
4-4	PHONE 1 (800) 825-8220	FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com