Project | Quantity | Item # |
Model Specified: |
| CSI Section 11400 |
|
|
|
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the
(4) adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
DIMENSIONAL DATA | R/ADT132WUT | R/ADT232WUT | R/ADT332WUT | |||
Net capacity total cu. ft. | 20.6 | (584 cu l) | 45.0 | (1275 cu l) | 69.3 | (1962 cu l) |
|
|
|
|
|
|
|
Net capacity refrig. cu. ft. | 10.5 | (297 cu l) | 23.2 | (657 cu l) | 47.5 | (1346 cu l) |
Net capacity freezer cu. ft. | 10.1 | (286 cu l) | 21.8 | (657 cu l) | 21.8 | (657 cu l) |
Length - overall in. | 297⁄8 (75.9 cm) | 58 (147.3 cm) | 861⁄8 (218.8 cm) | |||
Depth - overall in. | 35 (88.8 cm) | 35 (88.8 cm) | 35 (88.8 cm) | |||
Depth - over body in. | 32 (81.3 cm) | 32 (81.3 cm) | 32 (81.3 cm) | |||
Depth - door open 90° in. | 5711⁄16 (146.5 cm) | 5711⁄16 (146.5 cm) | 5711⁄16 (146.5 cm) | |||
Clear door width in. | 211⁄8 (53.6 cm) | 211⁄8 (53.6 cm) | 211⁄8 (53.6 cm) | |||
Clear | 271⁄2 (69.9 cm) | 271⁄2 (69.9 cm) | 271⁄2 (69.9 cm) | |||
Clear | n/a |
| 575⁄8 (146.3 cm) | 575⁄8 (146.3 cm) | ||
Height - overall on 6" legs | 831⁄4 (211.5 cm) | 831⁄4 (211.5 cm) | 831⁄4 (211.5 cm) | |||
No. Standard Shelves | 2 |
| 6 |
| 9 |
|
Shelf area total sq. ft.1 | 28.0 | (2.6 sq m) | 37.6 | (3.49 sq m) | 56.4 | (5.23 sq m) |
Shelf area refrig. sq. ft.1 | 14.0 | (1.3 sq m) | 18.8 | (1.75 sq m) | 37.6 | (3.49 sq m) |
Shelf area freezer sq. ft.1 | 14.0 | (1.3 sq m) | 18.8 | (1.75 sq m) | 18.8 | (1.75 sq m) |
|
|
|
| |||
RDT Net Wt. lbs. | 455 (206 kg) | 705 (320 kg) | 1030 (467 kg) | |||
|
|
|
| |||
ADT Net Wt. lbs. | 405 (184 kg) | 615 (279 kg) | 900 (408 kg) | |||
|
|
|
|
|
|
|
ELECTRICAL DATA |
|
|
|
|
|
|
Voltage | 115/60/1 | 115/60/1 | 115/60/1 | |||
Feed wires with Ground | 3 |
| 3 |
| 3 |
|
Full load amperes | 10.7 |
| 16.0 |
| 21.6 |
|
REFRIGERATION DATA |
|
|
|
|
|
|
Refrigerant - Refrigerator | ||||||
|
|
|
| |||
Refrigerant - Freezer | ||||||
|
|
| ||||
BTU/HR H.P. - Refigerator2 1130 (1⁄5 HP) | 1730 (1⁄4 HP) | 4200 (1⁄2 HP) | ||||
BTU/HR H.P. - Freezer2 | 1440 (1⁄3 HP) | 2170 (1⁄2 HP) | 2160 (1⁄2 HP) |
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.
2= Based on a 90 degree F ambient and 20 degree F evaporator for the refrigerated section and a 90 degree F ambient and
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet
Refrigeration System
Atop mounted,
Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation.
A 9' cord and plug is provided standard on one and two section models. Standard operating temperatures are 34 to 38°F for the refrigerator compartment and 0 to
Controller
The easy to use water resistant
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins (one section models are supplied standard with two chrome plated shelves). Shelves are
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the
Equipped With One NEMA
(1 section models only)
Equipped With One NEMA
(2 section models only)
NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.
Continued product development may necessitate specification changes without notice. Part No. TR35779 (revised 1/07)
SECTION | TRAULSEN |
|
|
|
4401 BLUE MOUND RD. | FT. WORTH, TX 76106 |
|
| |
PHONE 1 (800) |
|
| ||
| Website: www.traulsen.com |
|
|
|
|
|
|
|
|