Project | Quantity | Item # |
Model Specified: |
| CSI Section 11400 |
|
|
|
Specifications
CONSTRUCTION, HARDWARE AND INSULATION
Cabinet exterior, including front, one piece sides, louver assembly and doors are constructed of heavy gauge stainless steel. Cabinet interior is constructed of stainless steel. Exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. The interior floor is constructed of stainless steel and insulated with 3⁄4" of resilient cork. A readily attachable stainless steel ramp is provided.
Doors are equipped with removable plug cylinder locks and guaranteed for life cam- lift, gravity action,
Vinyl magnetic door gaskets assure tight door seal and are easily removable for cleaning. Cabinet contains high density,
DIMENSIONAL DATA |
| |
Net Capacity cu. ft. | 74.3 (2105 cu l) |
|
Length - Overall in. | 68 (172.7 cm) |
|
Depth - Over Body in. | 32 (81.3 cm) |
|
Depth - with door open 90° | 631⁄4 (160.7 cm) |
|
Depth - Overall in. | 359⁄16 (90.3 cm) |
|
Clear Door Width in. | 271⁄8 (68.8 cm) |
|
Clear Full Door Height in. | 665⁄16 (168.4 cm) |
|
Height - Overall in. | 831⁄4 (211.5 cm) |
|
ELECTRICAL DATA1 |
|
|
Voltage | 208/115/60/1 |
|
Feed Wires with Ground | 4 |
|
Full Load Amperes | 16.0 |
|
REFRIGERATION DATA1 |
|
|
Refrigerant |
| |
BTU/HR2 (HP) | 3790 (3/4 HP) |
|
CARTON DIMENSIONS |
|
|
Length - Crated in. | 73 (185 cm) |
|
Depth - Crated in. | 44 (112 cm) |
|
Height - Crated in. | 921⁄2 (235 cm) |
|
Volume - Crated cu. ft. | 172 (4872 cu l) |
|
WEIGHT DATA |
|
|
Net Weight - Uncrated lbs. | 700 (318 kg) |
|
Gross Weight - Crated lbs. | 865 (392 kg) |
|
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Wattage is determined by listed amps X listed volts X an average run time of 70% for refrigerators and 80% for freezers.
2= Based on a 90 degree F ambient and 20 degree F evaporator.
Equipped With One NEMA L14-20P Plug
Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.
REFRIGERATION SYSTEM
Atop mounted,
INTERIOR ARRANGEMENTS
This model is designed to accommodate two (2)
WARRANTIES
Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available.
Elevation - RET232LUT-FHS
Plan -
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.
Continued product development may necessitate specification changes without notice. | Section - | ||||
Part No. TR35852 (revised 1/07) |
|
|
|
| |
|
|
|
|
|
|
SECTION | TRAULSEN |
|
|
|
|
4401 BLUE MOUND RD. | FT. WORTH, TX 76106 |
|
|
| |
PHONE 1 (800) |
|
|
| ||
| Website: www.traulsen.com |
|
|
|
|
|
|
|
|
|
|