Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides and louver assembly are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior is constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.

Doors are equipped with removable plug cylinder locks and guaranteed for life cam- lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. An external switch is provided to activate the interior incandescent lighting.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/AHT126WUT

R/AHT226WUT

Net capacity cu. ft.

19.1 (541 cu l)

40.8 (1156 cu l)

Length - overall in.

2978 (75.9 cm)

58 (147.3 cm)

Depth - overall in.

29 (73.6 cm)

29 (73.6 cm)

Depth - less handle in.

 

 

Depth - over body in.

26 (66.0 cm)

26 (66.0 cm)

Depth - door open 90° in.

571116 (146.5 cm)

571116 (146.5 cm)

Clear door width in.

2112 (54.6 cm)

2112 (54.6 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (146.3 cm)

Height - overall on 6" legs

8314 (211.5 cm)

8314 (211.5 cm)

No. Standard Shelves

3

6

Shelf area sq. ft.1

14.6 (1.35 sq m)

29.2 (2.71 sq m)

RHT Net Wt. lbs.

345 (156 kg)

550 (249 kg)

 

 

 

AHT Net Wt. lbs.

305 (138 kg)

480 (218 kg)

 

 

 

ELECTRICAL DATA

 

 

Voltage

115/60/1

115/60/1

Feed wires with Ground

3

3

Full load amperes2

8.0

10.3

Full load amperes3

9.0 (2 lamps)

12.2 (3 lamps)

REFRIGERATION DATA

 

 

 

 

 

Refrigerant

R-134a

R-134a

 

 

 

BTU/HR H.P.4

2220 (13 HP)

4200 (12 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

2= Amp figure shown as supplied with standard incandescent lighting.

3= Amp figure shown as supplied with optional fluorescent lighting, note that 2-section models will be supplied with a NEMA 5-20P plug as a result.

4= Based on a 90 degree F ambient and 20 degree F evaporator.

5= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -

Elevation -

 

R/AHT126WUT

R/AHT226WUT

Plan -

 

 

R/AHT126WUT

Plan - R/AHT226WUT

Equipped With One

2 Section Fluorescent Light

NEMA 5-15P Plug

Models Are Equipped With One

 

NEMA 5-20P Plug

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any

Section - All Models

 

additional warranties.

 

 

 

Continued product development may necessitate specification changes without notice.

 

Part No. TR35830 (revised 1/07)

 

 

SECTION

TRAULSEN

 

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

 

11-5

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

 

Website: www.traulsen.com

Page 2
Image 2
Traulsen RHT126WUT-HHG warranty Specifications, Dimensional Data AHT126WUT AHT226WUT, Electrical Data, Refrigeration Data

RHT126WUT-HHG specifications

The Traulsen RHT126WUT-HHG represents a pinnacle in commercial refrigeration, combining cutting-edge technology with user-friendly design to meet the demands of busy kitchens. This reach-in refrigerator is built to ensure food safety and energy efficiency, making it an ideal choice for restaurants, catering services, and food service operations.

One of the standout features of the RHT126WUT-HHG is its spacious interior. The unit offers ample storage space with four adjustable shelves, allowing for flexible organization of various products. The refrigerator has a generous capacity of 26 cubic feet, ensuring there’s room for everything from large ingredient bins to smaller items, making it versatile for different types of food service needs.

The construction of the RHT126WUT-HHG emphasizes durability and ease of use. It is built with a stainless steel exterior and aluminum interior that not only provides a sleek, professional look but also ensures longevity. The commercial-grade door comes with a self-closing mechanism to maintain temperature and includes a stay-open feature for convenience during busy times. Additionally, the full-height insulated door helps optimize energy efficiency.

Temperature control is crucial in any refrigeration unit, and the Traulsen RHT126WUT-HHG excels in this regard. Equipped with a state-of-the-art microprocessor control system, the refrigerator offers precise temperature management ranging from 33°F to 41°F. This level of accuracy helps maintain the integrity of perishable items. Moreover, it features an advanced refrigeration system that utilizes environmentally-friendly refrigerants, contributing to lower energy consumption.

The unit showcases enhanced overall performance with its large evaporator coil and powerful compressor system, ensuring rapid cooling even under frequent use. It also includes a digital display, providing real-time feedback on the internal temperature, which simplifies monitoring.

Another remarkable aspect is the sound-reduction technology incorporated into the design, allowing for a quieter operation that is beneficial in kitchen environments where noise pollution can be a concern.

In summary, the Traulsen RHT126WUT-HHG is a high-performance reach-in refrigerator that combines functionality, durability, and energy efficiency. With its spacious interior, advanced temperature controls, and user-friendly features, it is well-equipped to handle the rigors of any professional kitchen while ensuring food safety and quality.