Traulsen RLT132WUT-FHS warranty Specifications, Dimensional Data ALT132WUT ALT232WUT ALT332WUT

Project	Quantity	Item #
Model Specified:		CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four

(4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA	R/ALT132WUT	R/ALT232WUT	R/ALT332WUT
Net capacity cu. ft.	24.2 (686 cu l)	51.6 (1462 cu l)	79.0 (2238 cu l)
Length - overall in.	297⁄8 (75.9 cm)	58 (147.3 cm)	861⁄8 (218.8 cm)
Depth - overall in.	35 (88.8 cm)	35 (88.8 cm)	35 (88.8 cm)
Depth - less handle in.	333⁄4 (84.4 cm)	333⁄4 (84.4 cm)	333⁄4 (84.4 cm)
Depth - over body in.	32 (81.3 cm)	32 (81.3 cm)	32 (81.3 cm)
Depth - door open 90° in.	5711⁄16 (146.5 cm)	5711⁄16 (146.5 cm)	5711⁄16 (146.5 cm)
Clear door width in.	211⁄8 (53.6 cm)	211⁄8 (53.6 cm)	211⁄8 (53.6 cm)
Clear half-door height in.	271⁄2 (69.9 cm)	271⁄2 (69.9 cm)	271⁄2 (69.9 cm)
Clear full-door height in.	575⁄8 (146.3 cm)	575⁄8 (146.3 cm)	575⁄8 (146.3 cm)
Height - overall on 6" legs	831⁄4 (211.5 cm)	831⁄4 (211.5 cm)	831⁄4 (211.5 cm)
RLT Net Wt. lbs.1	415 (188 kg)	705 (320 kg)	940 (426 kg)
ALT Net Wt. lbs.1	365 (166 kg)	625 (283 kg)	820 (372 kg)
No. Standard Shelves	3	6	9
Shelf area sq. ft.2	18.8 (1.75 sq m)	37.6 (3.49 sq m)	56.4 (5.23 sq m)
STANDARD ELECTRICAL & REFRIGERATION DATA
Voltage	115/60/1	115/60/1	208/115/60/1
Feed wires with Ground	3	3	4
Full load amperes	11.5	14.9	11.0
Refrigerant	R-404A	R-404A	R-404A
BTU/HR H.P.3	2160 (1⁄2 HP)	3790 (3⁄4 HP)	4710 (1 HP)
ELECTRICAL & REF'N DATA FOR UNITS BUILT WITH -10 DEGREE OPTION
Voltage	115/60/1	115/60/1	208/115/60/1
Feed wires with Ground	3	3	4
Full load amperes	12.0	14.9	11.0
Refrigerant	R-404A	R-404A	R-404A
BTU/HR H.P.3	2000 (3⁄4 HP)	2690 (1 HP)	3730 (1 HP)

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 0 to -5°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -

R/ALT232WUT

Elevation -	Elevation -
R/ALT132WUT	R/ALT332WUT

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= For shipping weights and dimensions please refer to spec sheet 12-4.

2= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

3= Based on a 90 degree F ambient and -20 degree F evaporator. For information on remote models, please refer to spec sheet 12-2.

NEMA Plug Chart For Freezer Models

1-Section	2-Section	3-Section
Models	Models	Models
5-15P	5-20P	L14-20P

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice. Part No. TR35762 (revised 1/07)

Plan - R/ALT132WUT

Plan - R/ALT332WUT

Plan - R/ALT232WUT

Section - All Models

SECTION	TRAULSEN
	4401 BLUE MOUND RD.	FT. WORTH, TX 76106
1-8	PHONE 1 (800) 825-8220	FAX-MKTG. 1 (817) 624-4302
	Website: www.traulsen.com