Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior, including front, one piece sides, louver assembly and doors are constructed of heavy gauge stainless steel. Cabinet interior and door liners are constructed of stainless steel. Exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. The interior floor is constructed of stainless steel and insulated with 34" of resilient cork. A readily attachable stainless steel ramp is provided.

Doors are equipped with heavy-duty, extruded wiper gasket for sealing to bottom ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handle is mounted horizontally over recess in door which limits protrusion from door face into aisleways.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Cabinet and door contains high density, non-CFC, foamed in place polyurethane insulation.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, Defrost Lockout Feature (freezer models only) and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabi- net Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Refrigeration System - Refrigerator Models

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features a plenum effect blower coil, large, high humidity evaporator coil located outside the food zone, and a top mounted non-electric condensate evaporator. Standard operating temperature is 36 to 38°F.

Refrigeration System - Freezer Models

Atop mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one piece louver assembly. It features a plenum effect blower coil, large, high humidity, interior mounted mullion coils, and an automatic preset time activated electric defrost. A floor drain or optional electric condensate evaporator is required for condensate removal. Standard operating temperature is 0 to -5°F.

Interior

Readily removable, interior-mounted, stainless steel guides for rack are provided for protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep by 66" high. Racks supplied by others.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

DIMENSIONAL DATA

RRI264LUT

RRI364LUT

RIF264LUT

RIF364LUT

Net capacity cu. ft.

154.5 (4377 cu l)

239.0 (6771 cu l)

154.5 (4377 cu l)

239.0 (6771 cu l)

Length - overall in.

68 (172.7 cm)

10012 (255.3 cm)

68 (172.7 cm)

10012 (255.3 cm)

Depth - overall in.

67916 (171.6 cm)

67916 (171.6 cm)

67916 (171.6 cm)

67916 (171.6 cm)

Depth - over body in.

64 (162.6 cm)

64 (162.6 cm)

64 (162.6 cm)

64 (162.6 cm)

 

 

 

 

 

Depth - with door open

9514 (241.9 cm)

9514 (241.9 cm)

9514 (241.9 cm)

9514 (241.9 cm)

90 degrees in.

 

 

 

 

Clear door width in.

27116 (68.8 cm)

27116 (68.8 cm)

27116 (68.8 cm)

27116 (68.8 cm)

Clear door height in.

66516 (168.4 cm)

6638 (168.6 cm)

66516 (168.4 cm)

6638 (168.6 cm)

Height - overall in.

8314 (211.5 cm)

8314 (211.5 cm)

8314 (211.5 cm)

8314 (211.5 cm)

Rack Capacity

4

6

4

6

Net Wt. lbs.

700 (318 kg)

980 (445 kg)

820 (372 kg)

1130 (513 kg)

ELECTRICAL DATA

 

 

 

 

Voltage

208-230/115/60/1

208-230/115/60/1

208-230/115/60/1

208-230/115/60/1

Feed wires with Ground

4

4

4

4

Full load amperes

17.0

19.2

22.0

31.6

Wattage1

2475

2795

3660

5258

REFRIGERATION DATA

 

 

 

 

Refrigerant

R-134a

R-134a

R-404A

R-404A

BTU/HR H.P.2

8400 (2 x 12 HP)

10240 (2 x 34 HP)

10440 (2 x 1 HP)

15160 (4 x 34 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Based on a 90 degree F ambient and 20 degree F evaporator for refrigerators and a 90 degree F ambient and -10 degree F evaporator for freezers.

2= Wattage is determined by listed amps X listed volts X an average run time of 70% for refrigerators and 80% for freezers.

3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

4= Shipped in two cartons for assembly at job site. For total shipping weight, double figure shown.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and

any additional warranties. For fast order entry: Fax 1 (800) 765-8728.

Continued product development may necessitate specification changes without notice. Part No. TR35808 (revised 1/07)

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12above is required in order to perform certain maintenance tasks.

SECTION

TRAULSEN

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

7-6

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

Page 4
Image 4
Traulsen RR1264LUT-FHS warranty Specifications

RR1264LUT-FHS specifications

The Traulsen RR1264LUT-FHS is a high-performance reach-in refrigerator designed for commercial kitchen environments where efficiency, reliability, and temperature control are paramount. This model exemplifies industry standards in refrigeration technology, ensuring that food and beverages are stored at optimal temperatures for safety and freshness.

One of the key features of the RR1264LUT-FHS is its impressive refrigeration system which utilizes a top-mounted compressor. This design not only enhances the unit's cooling efficiency but also facilitates easier maintenance. The top-mounted system protects the compressor from dust and debris, which contributes to a longer lifespan and reduced wear and tear.

The unit boasts a stainless steel exterior and interior construction, providing durability and easy cleaning. The stainless steel surface is not only aesthetically pleasing but is also resistant to corrosion and scratches, ensuring that the refrigerator maintains its professional look even in high-demand environments. The unit also includes an aluminum interior that enhances temperature retention and simplifies sanitization.

Equipped with an advanced digital control system, the RR1264LUT-FHS allows users to easily monitor and adjust temperatures to meet specific storage needs. The electronic control system features an accurate temperature display and includes alarms for over-temperature alerts, minimizing the risk of food spoilage.

The refrigerator features five adjustable, epoxy-coated shelves that maximize storage capabilities while allowing for flexible organization. The shelves are designed to accommodate various-sized items, giving operators the versatility to store everything from condiments to bulk food items.

Energy efficiency is another standout characteristic of the Traulsen RR1264LUT-FHS. It operates using a CFC-free refrigerant, aligning with modern environmental standards while maintaining optimal cooling performance. The unit also includes energy-saving technologies that lower operational costs, making it a cost-effective choice for busy restaurants and catering operations.

Furthermore, the unit is ADA compliant, with a height that allows for easy accessibility while ensuring it meets the specifications for the Americans with Disabilities Act, making it an inclusive choice for all kitchen staff.

In summary, the Traulsen RR1264LUT-FHS combines robust construction, high-efficiency refrigeration technology, and user-friendly controls to deliver a reliable cooling solution for commercial kitchens. Its features make it an essential asset for any foodservice operation looking to uphold quality and safety standards.