Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. The interior floor is constructed of stainless steel and insulated with 34" of resilient cork. Readily attachable stainless steel ramps are provided to facilitate loading/unloading.

Doors are equipped with a heavy-duty, extruded wiper gasket for sealing to bottom ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent light- ing. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/ARI132LPUT

R/ARI232LPUT

R/ARI332LPUT

Net capacity cu. ft.

38.8 (1099 cu l)

80.2 (2272 cu l)

117.5 (3329 cu l)

 

 

 

 

Length - overall in.

3512 (90.2 cm)

68 (172.7 cm)

10012 (255.3 cm)

Depth - overall in.

3918 (99.4 cm)

3918 (99.4 cm)

3918 (99.4 cm)

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

32 (81.3 cm)

Depth - doors open 90° in.

9412 (240.0 cm)

9412 (240.0 cm)

9412 (240.0 cm)

Clear door width in.

2718 (68.8 cm)

2718 (68.8 cm)

2718 (68.8 cm)

Clear door height in.

66516 (168.4 cm)

66516 (168.4 cm)

66516 (168.4 cm)

Height - overall in.

8314 (211.5 cm)

8314 (211.5 cm)

8314 (211.5 cm)

RRI Net Wt. lbs.

490 (222 kg)

775 (352 kg)

1050 (476 kg)

 

 

 

 

ARI Net Wt. lbs.

415 (188 kg)

670 (304 kg)

915 (415 kg)

 

 

 

 

Rack Capacity - 66" High

1

2

3

ELECTRICAL DATA

 

 

 

Voltage

115/60/1

115/60/1

115/60/1

Feed wires with Ground

3

3

3

Full load amperes

11.6

13.4

15.2

 

 

 

 

REFRIGERATION DATA

 

 

 

 

 

 

 

Refrigerant

R-134a

R-134a

R-134a

 

 

 

 

BTU/HR H.P.1

2220 (13 HP)

4200 (12 HP)

5120 (34 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Based on a 90 degree F ambient and 20 degree F evaporator.

2= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

One Section Models Equipped With One

NEMA 5-15P Plug

Two & Three Section Models Equipped

With One NEMA 5-20P Plug

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Readily removable, interior-mounted, stainless steel guides for rack are provided for protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep by 66" high. Racks supplied by others.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -

Elevation -

Elevation -

R/ARI132LPUT

R/ARI232LPUT

R/ARI332LPUT

Plan - R/ARI132LPUTPlan - R/ARI232LPUT

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Plan - R/ARI332LPUT

Continued product development may necessitate specification changes without notice.

Part No. TR35767 (revised 1/07)

 

Section - All Models

 

 

 

 

 

SECTION

TRAULSEN

 

 

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

 

 

1-13

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

 

 

 

Website: www.traulsen.com

 

 

 

 

 

 

 

 

Page 2
Image 2
Traulsen RRI332LPUT-FHS warranty Specifications, Dimensional Data ARI132LPUT ARI232LPUT ARI332LPUT, Electrical Data