Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/AHT126WPUT

R/AHT226WPUT

Net capacity cu. ft.

20.4 (578 cu l)

43.5 (1234 cu l)

 

 

 

Length - overall in.

2978 (75.9 cm)

58 (147.3 cm)

Depth - overall in.

311516 (81.2 cm)

311516 (81.2 cm)

Depth - over body in.

26 (66.0 cm)

26 (66.0 cm)

Depth - doors open 90° in.

7738 (196.5 cm)

7738 (196.5 cm)

Clear door width in.

2112 (54.6 cm)

2112 (54.6 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (146.3 cm)

Height - overall on 6" legs

8314 (211.5 cm)

8314 (211.5 cm)

RHT Net Wt. lbs.

370 (168 kg)

600 (272 kg)

 

 

 

AHT Net Wt. lbs.

330 (150 kg)

530 (240 kg)

No. Standard Shelves

3

6

Shelf area sq. ft.1

14.6 (1.35 sq m)

29.2 (2.71 sq m)

ELECTRICAL DATA

 

 

Voltage

115/60/1

115/60/1

 

 

 

Feed wires with Ground

3

3

 

 

 

Full load amperes

8.3

9.2

 

 

 

REFRIGERATION DATA

 

 

Refrigerant

R-134a

R-134a

BTU/HR H.P.2

2220 (13 HP)

2220 (13 HP)

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation -Elevation -

R/AHT126WPUT R/AHT226WUT

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

2= Based on a 90 degree F ambient and 20 degree F evaporator.

3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other informationPlan - R/AHT126WPUT on remote models, please refer to spec sheet 12-2.

Equipped With One NEMA 5-15 P Plug

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

 

 

 

Plan - R/AHT226WPUT

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any

 

 

 

additional warranties.

 

 

 

 

 

Continued product development may necessitate specification changes without notice.

Section - All Models

Part No. TR35761 (revised 1/07)

 

 

 

 

 

 

 

 

 

 

SECTION

TRAULSEN

 

 

 

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

 

 

 

1-7

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

 

 

 

Website: www.traulsen.com

 

 

 

 

 

 

 

 

 

 

Page 2
Image 2
Traulsen TR35761 warranty Specifications, Dimensional Data AHT126WPUT AHT226WPUT, Electrical Data, Refrigeration Data