Traulsen TR35832 Specifications, Project, Quantity, Item #, Model Specified, CSI Section, 11-6

Models: TR35832

1 2
Download 2 pages 44.13 Kb
Page 2
Image 2
Specifications

Project

Quantity

Item #

Model Specified:

 

CSI Section 11400

 

 

 

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides and louver assembly are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior is constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.

Doors are equipped with removable plug cylinder locks and guaranteed for life cam- lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. An external switch is provided to activate the interior incandescent lighting.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Anti condensate heaters are located behind each door opening.

The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

R/AHT132DUT

R/AHT232DUT

Net capacity cu. ft.

17.7 (501 cu l)

42.0 (1190 cu l)

Length - overall in.

24 (61.0 cm)

48 (121.9 cm)

Depth - overall in.

35 (88.8 cm)

35 (88.8 cm)

Depth - less handle in.

 

 

Depth - over body in.

32 (81.3 cm)

32 (81.3 cm)

Depth - door open 90° in.

5434 (139.1 cm)

5434 (139.1 cm)

Clear door width in.

1858 (47.3 cm)

19916 (54.6 cm)

Clear half-door height in.

2712 (69.9 cm)

2712 (69.9 cm)

Clear full-door height in.

5758 (146.3 cm)

5758 (49.7 cm)

Height - overall on 6" legs

8314 (211.5 cm)

8314 (211.5 cm)

No. Standard Shelves

3

6

Shelf area sq. ft.1

14.2 (1.3 sq m)

31.6 (2.9 sq m)

RHT Net Wt. lbs.

330 (150 kg)

574 (260 kg)

 

 

 

AHT Net Wt. lbs.

290 (132 kg)

446 (202 kg)

 

 

 

ELECTRICAL DATA

 

 

Voltage

115/60/1

115/60/1

Feed wires with Ground

3

3

Full load amperes2

8.0

10.3

Full load amperes3

9.0 (2 lamps)

12.2 (3 lamps)

REFRIGERATION DATA

 

 

 

 

 

Refrigerant

R-134a

R-134a

 

 

 

BTU/HR H.P.4

1710 (13 HP)

4200 (12 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

2= Amp figure shown as supplied with standard incandescent lighting.

3= Amp figure shown as supplied with optional fluorescent lighting, note that 2-section models will be supplied with a NEMA 5-20P plug as a result.

4= Based on a 90 degree F ambient and 20 degree F evaporator.

5= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation - Elevation -

R/AHT132DUT R/AHT232DUT

Plan - R/AHT132DUT

Equipped With One

2 Section Fluorescent Light

Plan - R/AHT232DUT

NEMA 5-15P Plug
Models Are Equipped With One

 

NEMA 5-20P Plug

 

Section - All Models

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice.

Part No. TR35832 (revised 1/07)

SECTION

TRAULSEN

 

4401 BLUE MOUND RD.

FT. WORTH, TX 76106

11-6

PHONE 1 (800) 825-8220

FAX-MKTG. 1 (817) 624-4302

Website: www.traulsen.com

Page 2
Image 2
Traulsen TR35832 Specifications, Project, Quantity, Item #, Model Specified, CSI Section, 11-6, Equipped With One, Phone