TRENDnet 1000 Base-SX/LX manual Hardware Installation, Installing two stand alone Fiber Converters

2. Hardware Installation

Installing two stand alone Fiber Converters

1.Connect the fiber cable to the fiber converters. This cable must be multi-mode for the TFC-1000MSC. This cable must be single-mode for the TFC-1000S20/S50/S70/S10D3/ S10D5.

2.Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet port on your switch (e.g TEG-S160TX or TEG-S240TX).

3.Connect the power adapter to the back of the fiber converter.

Note: The TX and RX cables must be reverse on the opposite fiber connection.

Note: The TFC-1000S10D3 must be paired with the TFC-1000S10D5.

2

English