Manuals / Brands / Photography / Security Camera / TRENDnet / Photography / Security Camera

TRENDnet Pan/Tilt Internet Camera Server 4.4 Network Settings, Network >> Network, DHCP, „IP Setting

1 100

Download 100 pages, 3.51 Mb

4.4 Network Settings

The Network menu contains three sub-menus that provide the network settings for the camera, such as the IP Setting, DDNS Setting, IP Filter, and Wireless network.

Network >> Network

IP Setting

This item allows you to select the IP address mode and set up the related configuration. The default setting is DHCP mode enabled.

-33 -

Contents

Page PREFACE Chapter 6 Appendix NOTE Page Page CHAPTER INTRODUCTION 1.1 Package Contents 1.2 Getting to Know Your Camera Rear View 1.3 Features and Benefits 1.4 System Requirement HARDWARE INSTALLATION 2.1 Installing the Wall Mount Kit 2.2 Connecting the Camera to LAN/WLAN 2.3 Applications of the Camera ACCESSING THE CAMERA 3.1 Using IPSetup Browse” Installation Complete Finish Start \Program\TRENDnet\IPSetup 7.Click Start > Programs > TRENDnet > IPSetup, and then click IPSetup Camera Display Area: Change IP: Static IP DHCP Change 3.2 Accessing to the Camera Page Yes Camera Information Live View Image Zoom In Buttons Nightmode Buttons Live View/Setup Switch Auto Patrol Stop Number button Apply Function Buttons 3.3 Configuring the IP Address of the PC CONFIGURING THE CAMERA 4.1 Using the Web Configuration 4.2 Using Smart Wizard Step 2. IP Settings Choose DHCP, Static IP or PPPoE Step 3. Email Settings Step 4. Wireless Networking Step 5. Confirm Settings <Prev Cancel 4.3 Basic Setup Basic >> System Basic >> Date & Time Basic >> User UserList: Delete „Guest 4.4 Network Settings Network >> Network DHCP: Static IP: PPPoE: User Name Password Host Name „UPnP „Ports Number HTTP Port: Network >> IP Filter Network >> Wireless Setting (For TV-IP410Wonly) Site Survey Wireless Mode: the camera: Infrastructure or Ad-Hoc Channel: Authentication: Key Length: 64 bits 128 bits WEP Key 1/2/3/4: TKIP 4.5 Pan/Tilt Settings Pan & Tilt >> Pan & Tilt Settings 4.6 Setting up Video Video >> Camera Video >> Video „MJPEG Video Resolution: VGA QVGA QQVGA 4.7 Event Server Configuration Event Server Setting>> FTP Event Server Setting >> Email Sender Password: Receiver #1 Email Address: Receiver #2 Email Address: 4.8 Motion Detect 4.9 Event Config Event Configuration >> General Setting Event Configuration >> Arrange Schedule Profile Page Event Configuration >> Motion Detect Trigger Event Configuration >> Schedule Trigger Event Configuration >> GPIO Trigger Page 4.10 Tools Backup: Restore: Restore „Update Firmware Select the firmware: 4.11 Information SECURVIEW™ SOFTWARE 5.1Installation Welcome to the SecurView Setup Wizard Page Close Start \Program\TRENDnet\SecurView 5.2Using Installation Item features SETTING: PLAY: LOCK: SETTING > Account ALL RECORD: TIP „VIEW SELECTION Panel View mode buttons: SCAN: NEXT: SETTING > Other Time interval of scan „CAMERA Panel TRIGGER OUT: „SYSTEM Panel „PAN-TILTCONTROL Panel Direction/Home buttons: SWING: Swing „Video View Window and Camera List Video Viewing Window: Camera List: To add a camera Search camera Add Camera Input Page To remove a camera To link to the Web page of the camera To record video zTrigger recording by motion detection SETTING > Motion Configuration Recording zSchedule recording Configuration Schedule Recording Configuration Dates Days Dates: Page To configure the recording settings Recording File Path: Recording File Path Each Recording File Size: Reserved HDD space for each camera: To playback the recorded video To set up motion detection options Alarm: Beep Music Recording: Send Email: Account Other Information Page APPENDIX A.1 Specification WLAN Protocol support „Pan/Tilt Pan Tilt A.2 GPIO Terminal Application Connector Pin Assignment Interface Schematic A.3 Glossary of Terms

4.4 Network Settings

Network >> Network

IP Setting

IP Setting