Q4: After I successfully configured the Access Point to meet my network settings, I can not connect to my network using wireless computers.
A4: If you have a DHCP server in your network, you need to go into TCP/IP settings again and
Q5: All the settings are correct, but I can not make a wireless connection to the Access Point.
A5: First, double check that the WLAN light on the Access Point is lit. Second, power cycle the Access Point by unplugging the power to the Access Point. Wait 15 seconds, then plug the power back in. Third, contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the Access Point is TRENDnet.
If you still encounter problems or have any questions regarding the
7