Troubleshooting
1.I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the
1.Check your hardware settings again by following the instructions in Section 2.
2.Make sure the LAN and WLAN lights are lit.
3.Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the steps below).
4.Press on the factory reset button for 15 seconds.
Windows 7
1.Go into the Control Panel, click Network and Sharing Center, click Change Adapter Settings and then
2.Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on
Obtain an IP address automatically.
Windows Vista
1.Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then
2.Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on
Obtain an IP address automatically.
5
