TRENDnet TK400K manual Operation, Hot-Key command = ScrLk + ScrLk + Command keys

4. Operation

To switch between computers, you use the front-panel push buttons or hot-key commands.

Hot-Key Commands

A keyboard hot-key command consists of three keystrokes:

Hot-Key command = ScrLk + ScrLk + Command key(s)

After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode.

Below are the “Hot-Key” commands:

ScrLk	+	ScrLk	+	= Previous Channel
ScrLk	+	ScrLk	+	= Next Channel
ScrLk	+	ScrLk	+	S = Auto Scan

In Hot-Key mode, press the “Up-Arrow” to select the previous port, “Down Arrow” to select the next port, and “S” key to set the KVM switch to Auto-Scan mode.

4English