Manuals / TRENDnet / Computer Equipment / Network Router

TRENDnet TPL-110AP manual Security Tab Here you can adjust the following

Models: TPL-110AP

1 16

Download 16 pages 46.62 Kb

Page 11

Security Tab

Security Tab

Here you can adjust the following:

-Setup the information of External/ Internal RADIUS Server

-Enable Wired 802.1x

-Open the Network Authentication

-Enable WEP Encryption

-Setup WPA Pre-Shared Keys

Firmware Tab

- Here you can update the new firmware. (Note: You should download the new firmware first)

10

Image 11

TRENDnet TPL-110AP manual Security Tab Here you can adjust the following, Setup WPA Pre-Shared Keys Firmware Tab

Contents

Page FCC, CE, UL certificated IntroductionImportant Safety Information Power Getting start with your Powerline DeviceWhat This Package Contains? Necessary Equipment?Equipment that can be used with the TPL-110AP? PC or Laptop Setup GuidePC or Laptop Setup Guide TPL-110AP Setup Guide3. Select Internet Protocol TCP/IP and then click on Properties Windows 2000 / XP 1. Open Network ConnectionsWin XP Click on Start, Connect To, then Show All Connections 2. Right click on Local Area Connection and then select PropertiesSetting up the IP address on the TPL-110AP 3. Select the TCP/IP Protocol entry 4. Click on the Properties button 1. Click on Start, then Settings, and then Control Panelthese steps depending on your operating system. Windows 98 SE / ME 2. Double click on the Network iconOther Features Setup WPA Pre-Shared Keys Firmware Tab Security Tab Here you can adjust the followingSetup the information of External/ Internal RADIUS Server Enable Wired Open the Network Authentication Enable WEP EncryptionAppendix A Features Appendix B Limited Warranty Appendix C FCC Statement Limited Warranty