TRENDnet TPL306E2K manual Troubleshooting, TRENDnet User’s Guide, TPL-306E / TPL-306E2K

Models: TPL306E2K

1 30
Download 30 pages 739 b
Page 25
Image 25
Troubleshooting

TRENDnet User’s Guide

Troubleshooting

Please reference the items below if you continue to experience difficulty with installing and using your Powerline adapters.

Try power cycling the unit by unplugging it from the wall power outlet for 15 seconds and plugging it back in.

If the Powerline (PL) LED is red indicating good quality only, try plugging the Powerline adapter into another available wall power outlet to check if you can obtain better connection quality.

If you are having issues connecting the Powerline adapters after changing the encryption key using the Sync button or Powerline utility, reset the Powerline adapters to defaults using the physical Reset button.

Use a pin or paperclip and push and hold the Reset button for 1 second on each Powerline adapter. All LEDs will turn off and turn back on. This will reset the Powerline adapters to their default settings, default encryption key assignment HomePlugAV.

The Powerline adapters can provide better connectivity and performance when plugged directly into a wall power outlet instead of a power strip or surge protector.

Connecting the Powerline adapters to a power strip or surge protector may degrade Powerline performance.

Using the Powerline adapters on GFI protected outlets and electrical systems with AFCI circuit breakers as these items may degrade Powerline performance.

The Powerline adapters should not be used in areas with excessive heat.

Certain florescent or incandescent lights are noise sources on the electrical system and can degrade Powerline performance.

TPL-306E / TPL-306E2K

If your building has more than one circuit breaker box, the Powerline adapter may not be able to establish connectivity between different circuit breaker boxes. In this case, connect a Powerline adapter into a wall power outlet located on each of the circuit breaker boxes, and then connect an Ethernet cable between the Powerline adapters to bridge the two circuits together. This will allow the Powerline adapters from different circuit breaker boxes connect to each other.

In addition to this User’s Guide, you can find help below:

http://www.trendnet.com/support

(documentation, downloads, FAQs, how to contact technical support)

Autorun CD (Quick Installation Guide)

© Copyright 2012 TRENDnet. All Rights Reserved.

23

Page 25
Image 25
TRENDnet TPL306E2K manual Troubleshooting, TRENDnet User’s Guide, TPL-306E / TPL-306E2K