4.I am unable to print to my Print Server. What should I do?
1.Make sure you follow the exact steps for installing the Print Server in section 2.
2.Make sure to right click on the print server in the utility and click connect. If another user is using the print server, you must wait until the user is finished using it.
3.If you are connected to the print server and are idled for a couple of minutes, a warning message appears. If you do not respond within a minute, you will be automatically disconnected from the print server. You must connect to the print server again.
5.I can print a test page, but I cannot print anything from Microsoft Word or other applications.
Make sure to set the newly installed network printer as your default printer. Click Start and then click Printers & Faxes, verify that your printer icon has a check on it
6.I configured my Print Server to automatically receive an IP Address from a DHCP server, and now I cannot go into the Print Server's web utility.
Open the print server setup wizard (See 3. Configure the Print Server) to locate your Print Server's IP Address.
7.Is there a way to force a computer to give up ownership to the print server?
If the user has been idled for 5 minutes, the user will be automatically disconnected. You can also force a computer to give up owner ship to by unplugging the power to the print server and plug the power back in.
If you still encounter problems or have any questions regarding the
11
