TRENDnet TRENDNET Hot Key Commands, Hot Key command = Scroll Lock + Scroll Lock + Command keys

Hot Key Commands

A keyboard hot key command consists of at least three keystrokes:

Hot Key command = Scroll Lock + Scroll Lock + Command key(s)

After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the switch will exit hot key mode.

To select a specific PC port

Select PC = Scroll Lock + Scroll Lock + A + B	+ Y + Z
Bank number	Port number

For example, to select port 1, hit the following key sequence:

Select PC = Scroll Lock + Scroll Lock + 0 + 1 + 0 + 1

For example, to select port 8 of the 10th KVM switch on a series of daisy chained TK-802R's you hit the following key sequence:

Select PC = Scroll Lock + Scroll Lock + 1 + 0 + 0 + 8

Note: When using the KVM switch standalone, type in 0 + 1 for the bank number.

For a list of all the Hot Key commands, please see the Quick Reference Sheet.

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

6