Troubleshooting
Q1: How do I configure TCP/IP settings on my computer?
1.Go into the Control Panel and double- click the Network Connections icon,
and then
Properties.
2. Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.1.x.
Q2: The image is blurry. How do I fix this?
A2: You can adjust the Internet Camera's focus by rotating the lens.
Q3: When I click on Live Show Active X, the image does not load?
A3: First, make sure that you are using a browser that supports Active X. Second, make sure that Active X is installed.
Q4: How do I connect the
A4: Make sure that you configure the camera to have the same SSID, encryption mode and key (if enabled). Follow the instructions in section 2 to configure the camera with the SSID and encryption key.
Q5: After I successfully configured the
A5: First, verify that the wireless settings match your wireless network settings. Second, verify in the wireless section of the browser configuration that the Disable Wireless Communication option is not checked. Third, make sure to disconnect the Ethernet cable from the camera and verify that the LINK LED is blinking green.
If you still encounter problems or have any questions regarding the
5