TRENDnet Wireless Access Point manual Install Hardware

2. Install Hardware

Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. Please connect the computer configuring the TEW-450APB to the same switch/hub.

1.Connect a RJ-45 cable from the Switch/Hub to the LAN port of the Access Point and then connect the 2dBi Detachable Antenna.

2.Connect the AC Power Adapter to the Access Point and then to a power outlet.

3.Verify that the following front panel lights are on: LAN and WLAN.

2

English