ASSEMBLY AND MOUNTING INSTRUCTION
For 31902
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and identify all parts prior to building the unit. Each part is identified on the drawingfor reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them according to the illustration shown at the side.Place the parts on a scratch free surface;
STEP 2:Make sure the power is turned off at the junction box where the fixture is to be installed.Secure the cross bar to the ceiling junction box using junction box screws;
STEP 3:Use the wire nuts to connect the positive and negative wires.Connect the ground wire to the junction box ground port;
STEP 4: Secure the canopy to the ceiling with The knurled ring;
STEP 5: Buckle the quick link to the loop;
STEP 6:Install the loop to the fixture;
STEP 7: Install the center Column to the Fixture;
STEP 8:Install the correct bulbs(not provided);
STEP 9:install the center rod,washer glass shade, glass washer and the nut secure with bottom cap and finial;
Fixture
Washer | Glass Shade |
Glass Washer | |
Nut |
|
