ASSEMBLY AND MOUNTING INSTRUCTION
For 31909
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and identify all parts prior to building the unit. Each part is identified on the drawingfor reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them according to the illustration shown at the side. Place the parts on a scratchfree surface;
STEP 2: Make sure the power is turned off at the junction box where the fixture is to be installed. Secure the cross bar to the ceiling junction box using junction box screws;
STEP 3: Use the wire nuts to connect the positive and negative wires. connect the ground wire to the junction box ground port;
STEP 4: Secure the canopy to the ceiling with the knurled ring.
STEP 5:Install the Loop to the fixture;
STEP 6: Buckle the quick link to the loop;
STEP 7: Attach the glass shade to the fixture and fix it using the check ring and the Socket ring;
STEP 8: Install the correct bulb (not provided);
Loop
Center Rod
