ASSEMBLY AND MOUNTING INSTRUCTION
For 31912
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and identify all parts prior to building the unit. Each part is identified on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item for any reason. Please repack the unit using the original carton and inserts.
STEP 1: Unpack all the parts and classify them according to the illustration shown at the side. Place the parts on a scratch free surface;
STEP 2: Make sure the power is turned off at the junction box where the fixture is to be installed. secure the mounting strap to the ceiling junction box using junction box screws;
STEP 3:Use the wire nuts to connect the positive and negative wires .connect the ground wire to the junction box ground port ;
STEP 4: Secure the canopy to the ceiling with the knurled ring;
STEP 5: lnstall the loop to the colum;
STEP 6: Install center pipe and arms to the fixture with nut and ball nut as shown;
STEP 7: Install the tempered glass by using the rubber washer and the cap nut ;
STEP 8: Install the correct bulb (not provided);
STEP 9: Install threaded nipple to the fixture,glass Shade ,glass washer and nut. Secure with bottom cap and finial
