ASSEMBLY AND MOUNTING INSTRUCTION
For 31916
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and e identify all parts prior to building the unit. Each part is identified on the drawingfor reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them according to the illustration shown at the side. Place the parts on a scratchfree surface;
STEP 2: Make sure the power is turned Off at the Ceiling junction box where the fixture is to be installed.Secure the cross bar to the ceiling junction using the junction box screws;
STEP 3: Use the wire nuts to Connect positive and negative wires. Connect the Ground wire to the ground port;
Uni versal mounti ng bar
Fi xture
Threaded Ni ppl e
Gl ass Shade
STEP 4: Secure the fixture to the
Ceiling Junction box using two
Brass;
STEP 5: Install the correct bulbs (not provided);
STEP 6: Install the center rod to the fixture;
Glass Washer
Nut BottomCap
Fi ni al
STEP 7:Install the glass to the glass shade with nut .Secure with bottom cap and the finial.
