ASSEMBLY AND MOUNTING INSTRUCTION
For 31918
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and identify all parts prior to building the unit. Each part is identified on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them according to the illustration shown at the side.Place the parts on a scratch free surface;
STEP 2:Make sure the power is turned off at the junction box where the fixture is to be installed.Secure the cross bar to the ceiling junction box using junction
box screws;
STEP 3:Use the wire nuts to connect the positive and negative wires.Connect the ground wire to the junction box ground port;
STEP 4: Secure the canopy to the ceiling with The knurled ring;
STEP 5:Buckle the Quick Link to the Loop;
STEP 6:Install the Loop to the Fixture;
STEP 7: Install the center column to the fixture;
STEP 8:Attach the center rod bottom with Column the bottom cap and finial;
STEP 9: Install candle cover and fabric shade as shown ;
STEP 10: Install the correct bulbs not provided.
