Assembly Instructions

Hanging Fixture

This lamp uses five(5) 100-watt maximum Type A bulbs (Not included).

Cleaning Instructions

Do not use polish or cleaners. Wipe clean with a soft cloth.

A

1. Thread the Loop ( A) to the nipple of the Tube(B) until tighten.

2. Attach the Cap(C) to the Nipple (D) then secure by Tube (B).

3. Screw the Tube (K ) TO THE Nipple ( L) until tighten.

4. Place Glasses(F) over Sockets (G) and secure by Socket Rings (E).

5. Thread the Nipple ( I ) on Finial (J) to the Bottom Coupler (H) until tighten.

6. Install the light bulb (not provided) in accordance with the fixture specification.

7. Restore electricity and check the operation of your new light fixture.

33163

Typical Assembly Time: 15 minutes

Page 1
Image 1
Triarch 33163 manual Assembly Instructions, Hanging Fixture, Cleaning Instructions

33163 specifications

Triarch 33163 is an advanced integrated circuit that has garnered attention in the electronics community for its innovative features and capabilities. Designed primarily for power management applications, this device excels in providing efficient solutions for battery-operated systems, consumer electronics, and industrial applications.

At the heart of the Triarch 33163 is a highly integrated switching regulator prototype that offers remarkable energy efficiency. The device operates using pulse-width modulation (PWM) to minimize power loss during operation, which is critical for prolonging battery life in portable devices. Its capacity to handle varying loads makes it particularly well-suited for applications where power demand may fluctuate.

One of the main features of the Triarch 33163 is its adjustable output voltage range, which allows designers to tailor the voltage level according to the specific requirements of their applications. This flexibility is complemented by the device’s ability to deliver a high output current, making it a robust solution for demanding power requirements in various scenarios.

The Triarch 33163 integrates a wide variety of protection features to ensure reliable operation. These include overcurrent protection, thermal shutdown, and output short-circuit protection, all of which contribute to its high reliability and longevity in diverse operational environments. These features help safeguard the circuit and connected components, making it a favored choice among engineers.

Another important characteristic of the Triarch 33163 is its compact design. The chip comes in a small package, making it ideal for space-constrained applications without sacrificing performance. Its low-profile form factor allows for efficient placement on printed circuit boards (PCBs), which is essential for modern electronics that aim to achieve smaller sizes and reduced weights.

Additionally, the Triarch 33163 supports a variety of operational modes, including burst mode and continuous mode, which provide enhanced control over power consumption. Burst mode is particularly advantageous in battery-operated devices, as it switches the regulator to a low-power state when full power is not required, further extending battery life.

Overall, the Triarch 33163 stands out in the market with its combination of efficiency, flexibility, and reliability. Its advanced features, including adjustable output voltage, integrated protection mechanisms, and compact design, make it an ideal choice for a wide range of applications. Whether used in consumer electronics or industrial setups, this integrated circuit offers solutions that meet the growing demands for energy efficiency and performance in today’s electronic applications.