4.Operation Controls and Functions
4.1Transmitter
|
| POWER 5V |
|
|
| HDMI INPUT |
|
|
|
Transmitter |
|
| VIDEO | DOC |
|
|
| ||
|
|
|
| CAT6 OUTPUT |
1 | 2 | 3 | 4 | 5 |
1IR Transmitter: Connect IR blaster cable included in box to this input. Place the eye of the blaster in front of the source equipment. The IR blaster accepts a frequency range from 20 KHz to 60 KHz.
2HDMI Input: Connect the HDMI cable from your source's HDMI output
3Power 5V: Connect the 5 volt power supply included in box
4DDC CAT6 Output: Connect the DDC output of the Transmitter to the DDC input of the Receiver using CAT6 cable. CAT5E cable can be used if available with the same result.
5VIDEO CAT6 Output: Connect the Video Output of the Transmitter to the
Video input of the Receiver using CAT6E / 23AWG / solid cable. Note: using a Cable with different specification may result in different distance capabilities.
3