WASHING 2 KG OF MIXED FABRICS AT 50°C

Suppose you have 2 kg of lightly soiled mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature.

1. Load the laundry

Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent required and pour it into the main wash compartment and into the compartment marked if you have selected the “prewash” option.

C0070

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer).

Close the drawer gently.

C0071

4.Select the required programme

Turn the programme selector dial to the programme 6. The “start pause” light starts to flash. The pilot lights corresponding to the various phases making up the programme come on.

PROGRAMME

15 1

142

13

3

124

115

106

9 8 7

5.Select “spin reduction” or “no spin” option

Press the option button repeatedly, to select the desired option. The relevant light illuminates.

spin reduction

no spin

6. Select the required option

Select “prewash” or “rinse hold” option if required, the corresponding light illuminates.

prewash half rinse

load hold

7. Start the programme

Before starting up the machine check that:

the appliance is plugged in

the water supply tap is turned on

the drain hose is correctly and securely positioned

the door and the detergent dispenser drawer are closed.

10

Page 10
Image 10
Tricity Bendix AW 1001 W installation instructions Measure out the detergent, Measure out the fabric softener