35.292.972….AW1260.qxd 09/05/2005 18:43 Página 7
7 Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
ATTENTION!
If you turn the programme selector dial to another programme when the machine is working, the lights of the programme progress display start to flash. The machine will not perform the new selected programme.
After the machine has started, only the running phase pilot light stays on.
When the pilot light “wash” comes on this means that the machine is performing the washing phase. If you have selected the “prewash” function, this light will be on during the prewash phase too.
The “End” light flashes in the event of operating problems:
●4 flashes: door open
●2 flashes: problem with water draining
●1 flash: problem with water supply
For more information see paragraph “Something not working”?
The “door” pilot light indicates if the door can be opened:
-light on: the door cannot be opened
-light off: the door can be opened
-flashing light: the door is opening
It stays on during the whole programme indicating that the door is locked.
When the light goes out, the door can be opened.
8 Programme selector dial
The selector dial can be turned either clockwise or anticlockwise.
Position O corresponds to to Reset programme /Switching OFF of the machine.
Programme information
10 = Wool 
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M9604.
12 = Quick and cool
This is a complete programme to be used for lightly soiled laundry or for laundry which needs freshening up (not available for wool).
13 = Rinses
With this programme it is possible to rinse and spin garments which have been washed by hand.
The machine performs 3 rinses, followed by a final short spin at the speed selected by means of the relevant button.
14 = Drain
For emptying out the water of the last rinse in programmes with the RINSE HOLD option.
Turn first the programme selector dial to O, then select Drain programme 14 and depress the Start/Pause button.
15 = Spin
Separate spin for hand washed garments and after programmes with RINSE HOLD option. Before selecting this programme the selector dial must be turned to “O”. You can choose the speed by means of the relevant button to adapt it to the fabrics to be spun.
7
