Unpacking
All transit bolts and packing must be removed before using the appliance
You are advised to keep all the packaging for
■Unscrew and remove the three rear transit bolts (using a spanner).
■Lay the machine gently on its back, making sure that the hoses are not squashed.
We suggest a polystyrene angle bracket from the packing is placed on the floor before tilting it back to avoid the hoses being squashed.
■Carefully remove the polyethylene bags located at the base of the machine by pulling them toward the centre of the machine.
■Place the machine in an upright position and remove the three plastic bolts.
P0287 |
P0018 |
1 2 |
AL009 |
P0001
■Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction booklet.
P0002
26
