INSTALLATION INSTRUCTIONS

THINGS YOU NEED TO KNOW

WARNINGS:

This cooker must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions.

This cooker must be earthed.

Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 8).

Before connecting the cooker make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. The rating plate can be seen by opening the oven door and looking below the oven door seal.

Do not alter the electrical circuitry of this cooker.

THINGS TO NOTE

This cooker is designed to be fitted in cabinets of the recommended dimensions as shown (Fig. 3 and 4) without any modification to the cabinet.

If your cabinet interior dimension is between 565-570.mm the oven may still be fitted. However, a minor modification to the cabinet will be required.

The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

Enquiries regarding the installation of the cooker point if required should be made to your Regional Electricity Company to ensure compliance with their regulations.

The cooker point should be within 2m of the cooker to make it accessible to switch off the

lcooker in case of an emergency.

To protect the hands wear gloves when lifting the oven into its housing.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the cooker is connected to the mains supply and re-checked after fitting.

GETTING THINGS READY

lCHOICE OF ELECTRICAL CONNECTION

There are two possible ways to connect your cooker, please choose from the most appropriate after reading the descriptions.

a)It is recommended that this appliance is wired with suitably rated cable (min 13 A), into fixed wiring using a double pole isolator with at least 3mm contact separation in all poles and neutral, located within 2m of the appliance. If this fixed wiring circuit is only supplying the cooker, then a fuse of 13A ( or circuit breaker ) should be incorporated. When the circuit combines oven and hob, then wire and fuse rating should be increased accordingly.

Subject to Regional Electricity Company regulations if you wish to connect the oven and hob to the power supply you may use one of the following two methods:-

b)If you wish to connect an oven and a hob to a cooker point you can:-

i)By connecting the oven and hob separately to the cooker point. Oven and hob units should be separately connected to a control panel. In this case the cooker should be operated from 6mm² twin core, and earth, PVC insulated multicore cable. See Fig. 1.

Fig.1

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix BS 612/2 Installation Instructions, Things YOU Need to Know, Getting Things Ready, Things to Note
Page 7 Page 9

BS 612/2 specifications

The Tricity Bendix BS 612/2 is a remarkable built-in oven that caters to the cooking needs of modern households. Combining innovative design with advanced technology, this oven is engineered to provide convenience and efficiency, ensuring that meal preparation is both enjoyable and seamless.

One of the standout features of the BS 612/2 is its multifunctional capability, allowing users to choose from various cooking modes. Whether you prefer conventional cooking, fan-assisted baking, or grilling, this oven can accommodate different culinary techniques, making it ideal for a range of recipes. The fan-assisted mode is particularly notable as it creates an even distribution of heat, reducing cooking times and enhancing the final results.

Another key characteristic of the Tricity Bendix BS 612/2 is its user-friendly interface. The oven is equipped with a simple-to-navigate control panel, allowing for straightforward adjustments to temperature and cooking settings. The clear LED display provides crucial information at a glance, making it easy to monitor the cooking process.

Efficiency is at the heart of the BS 612/2’s design. It features an A-class energy rating, ensuring that it operates with minimal energy consumption while delivering optimal performance. This makes it not only an eco-friendly choice but also a cost-effective option for households looking to reduce their energy bills.

Safety is also a priority with the Tricity Bendix BS 612/2. It comes with a triple-glazed door, which minimizes heat loss while ensuring that the exterior remains cool to the touch, preventing accidents. The oven is also fitted with child safety locks, giving peace of mind to families with young children.

Furthermore, the BS 612/2 incorporates a self-cleaning function, which uses high temperatures to burn away food residues and grease, significantly reducing the time and effort needed for maintenance. This feature highlights the commitment to convenience and ease of use prevalent in the appliance’s design.

In terms of aesthetics, the Tricity Bendix BS 612/2 boasts a sleek and modern appearance, making it a stylish addition to any kitchen. Its compact size allows it to fit effortlessly into built-in cabinetry, maximizing space usage without compromising on functionality.

Overall, the Tricity Bendix BS 612/2 stands out as a versatile, efficient, and user-friendly built-in oven that meets the demands of contemporary cooking while offering features that enhance safety and ease of maintenance. Its combination of multifunctionality, energy efficiency, and modern design makes it a great investment for any culinary enthusiast.
Top Page Image Contents