Unpacking

Before starting the machine up, the packing must be removed as follows.

You are advised to keep all the packaging for re-use in case the machine is to be transported again.

Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed.

Remove the polystyrene block from the bottom of the machine and release the two plastic bags.

Carefully slide out the right polythene bag (1). Repeat the operation for the left polythene bag (2).

Remove the polystyrene base.

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which the bolts were fitted.

Plug the open holes with the plugs which you can find in the envelope containing the instruction booklet.

P0255

P1068

P0256

2

1

P1066

 

P0020

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units.

Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Your new machine has been designed to be permanently plumbed in to your home’s water supply and drainage system. However, if this is not possible, it may be connected to suitable existing taps with the drain hose discharging into a sink.

The appliance has two inlet hoses, hot and cold, with female 3/4” BSP thread connectors. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

27

Page 26 Page 28
Page 27
Image 27
Tricity Bendix BWD 1011 installation instructions Unpacking, Positioning, Installation on a Suspended Floor
Page 26 Page 28

BWD 1011 specifications

The Tricity Bendix BWD 1011 is a stylish and functional washing machine that aims to meet the needs of modern households. With a focus on efficiency, reliability, and user-friendly features, this model is designed to make laundry days simpler and more effective.

One of the standout features of the BWD 1011 is its impressive load capacity. With the ability to hold up to 5 kg of laundry, it caters to small to medium-sized families or individuals. This capacity ensures that users can wash a decent amount of clothes in one go, ultimately saving time and energy. Moreover, the machine’s compact design allows it to fit comfortably in smaller spaces, making it an ideal choice for apartments or homes where space is limited.

In terms of performance, the BWD 1011 is equipped with a range of wash programs tailored to different fabric types and levels of dirtiness. Users can select from various settings such as cotton, synthetic, delicate, and quick wash, allowing for versatile laundry care. The machine also incorporates a 1200 RPM spin speed, which effectively removes excess water from clothes, reducing drying time and enhancing overall efficiency.

The technology behind the BWD 1011 ensures quiet operation during both the washing and spinning cycles. This feature is particularly appealing for those living in close quarters with neighbors or who run household activities during early mornings or late evenings. The machine operates with minimal vibrations and noise, making it conducive for various home settings.

Energy efficiency is another key characteristic of the Tricity Bendix BWD 1011. It adheres to stringent energy ratings, helping users save on electricity bills while minimizing their environmental impact. This model exemplifies a commitment to sustainable living by combining performance with eco-friendliness.

User convenience is further highlighted by the machine's intuitive control panel. The easy-to-read display and straightforward buttons allow users of all ages to operate it without hassle. Furthermore, the delay start feature enables users to set the washing process to commence at a later time, thereby enhancing flexibility in day-to-day laundry routines.

Overall, the Tricity Bendix BWD 1011 stands out for its combination of capacity, performance, energy efficiency, and user-friendly technology, making it a reliable addition to any home looking for an efficient laundry solution.
Top Page Image Contents